MACHINES

Description Model
Details
TPT-2S

TPT-2S-60
Work Holding and Operation Collet Chuck 42mm - Hydraulic Collet Chuck 60mm - Hydraulic
Maximum Chucking Size 042mm X 500mm Long 060mm X 500mm Long
Maximum Machining Length 80mm Max 80mm Max
Maximum Size of Polygon A/F 85mm A/F 100mm
Spindle Speed Ratio 1:2 Std Mechanical 1:2 Std Mechanical
Work Spindle Nose Type and Size DIN A2-5 DIN A2-6
Main Spindle Motor TEFC 2.2 KW 1440 RPM TEFC 2.2 KW 1440 RPM
Main Spindle Drive Mitsubishi Variable Freq Drive Mitsubishi Variable Freq Drive
Z Axis Stroke - Drive 100mm - Servomotor 100mm - Servomotor
X Axis Stroke - Drive 90mm - Servomotor 90mm - Servomotor
Pos Accuracy and Repeatability 10 Microns 10 Microns
Feed Rate 0.01 ~ 0.5mm Per Rev 0.01 ~ 0.5mm Per Rev
Rapid Travel Rate 10 Mtrs Per Min 10 Mtrs Per Min
Centralized Lubrication 0.09 KW 0.09 KW
Coolant Pump 0.10KW 0.10KW
Control Voltage 220 VAC/24 VDC 220 VAC/24 VDC
Main Power Supply 3 Phase, 415VAC ±10% 50Hz 3 Phase, 415VAC ±10% 50Hz
Total Connected Load 5.15 KW (6.6HP) 5.15 KW (6.6HP)
Floor Area LXWXH 1.9M X 1.5M X 4.8M 1.9M X 1.5M X 4.8M
Nett Weight 1950 Kgs 1950 Kgs
Gross Weight 2100 Kgs 1950 Kgs
Description Model
Details
TPT-4S

TPT-5S
Work Holding and Operation Collet Chuck 42mm - Hydraulic Collet Chuck 60mm - Hydraulic
Maximum Chucking Size 042mm X 500mm Long 060mm X 500mm Long
Maximum Machining Length 180mm Max 180mm Max
Maximum Size of Polygon A/F 40mm A/F 40mm
Spindle Speed Ratio 1:1 ~ 1:99 Electronic 1:1 ~ 1:99 Electronic
Work Spindle Nose Type and Size DIN A2-5 DIN A2-5
Work Spindle Motor 4.78NM / 2,000 RPM 4.78NM / 2,000 RPM
Work Spindle Drive 4.78NM / 2,000 RPM 4.78NM / 2,000 RPM
Z Axis Stroke - Drive 200mm - Servomotor 200mm - Servomotor
X Axis Stroke - Drive 90mm - Servomotor 90mm - Servomotor
Y Axis Stroke - Drive 50mm - Manual 90mm - Servomotor
Pos Accuracy and Repeatability 10 Microns 10 Microns
Feed Rate 0.01 ~ 0.5mm Per Rev 0.01 ~ 0.5mm Per Rev
Rapid Travel Rate 10 Mtrs Per Min 10 Mtrs Per Min
Centralized Lubrication 0.09 KW 0.09 KW
Coolant Pump 0.10KW 0.10KW
Control Voltage 220 VAC/24 VDC 220 VAC/24 VDC
Main Power Supply 3 Phase, 415VAC ±10% 50Hz 3 Phase, 415VAC ±10% 50Hz
Total Connected Load 5.15 KW (6.6HP) 5.15 KW (6.6HP)
Floor Area LXWXH 2M X 1.9M X 2.2M 1.9M X 1.5M X 4.8M
Nett Weight 2200 Kgs 2200 Kgs
Gross Weight 2400 Kgs 2400 Kgs